Delivery:

NEXT DAY Delivery (if ordered before 14:00)

Key Features:

• Size: 4kg
• Coverage: 0.3kg per m2
• Application: Primer for use prior to the use of ClassicLiquid Top Coats & Detailer.

Description:

The ClassicLiquid system is a rapid curing polyurethane liquid membrane designed for overlaying existing roofing systems to create a durable and seamless waterproof layer. 

This 4 Litre ClassicLiquid Primer can be applied to many different substrates both porous and non porous and must be used prior to the use of ClassicLiquid Top Coats & Detailer.

Coverage rates will vary based on the existing roof porousity between 0.1 litres to 0.3 litres per square metre. Typically a semiporous surface will require 0.2 Litres / sqm meaning that this 4 litre tin will cover approximatey 20 square metres.

Application:

• It is essential that the intended substrate is thoroughly cleaned with a high pressure washer, on smaller areas a stiff broom and soapy water and rinse will suffice. Remove all oil, grease and wax contaminants, cement laitance and loose particles.

• Make good all cracks and blisters, fill surface irregularities with a suitable product. Allow to fully dry. Apply ClassicLiquid Primer at a sufficient coverage rate to seal the surface. Primer coverage rates will vary dependant on surface porosity Allow primer coat to fully dry. (approx. 2 hours but is dependent on ambient air temperature and humidity)

Downloads & Data Sheets: